Need to replace old recessed lighting fixtures with new ones or other lighting fixtures? There are a couple of steps you can do this. But the very first thing you should know is how to remove old recessed light housing. Trying to remove them without knowing how may worsen the situation or leave you some extra work to be done after you remove them.
Removing old recessed light housing isn’t such a task that you will require expertise to do it for you. Step-by-step guide mentioned below will help you to do this effortlessly.
5 Easy Steps: How to Remove Old Recessed Light Housing
Step 1 – Prepare and Gather Tools
First, you need to turn off the breaker related to the lighting fixture you want to remove. This will provide safety while you continue doing your work. You can use a voltage detector to ensure that there is no live power flowing through the wires.
You will require some tools to remove recessed light housing. The tools are a step ladder, electrical pliers, vice grips, screwdriver, electrical safety gloves and flashlight.
Step 2 – Take Apart the Trim
To remove the recessed light fixture, you have to start with recessed light trim. The trim is a part of the recessed fixtures that stays in the light housing. There are two types of recessed trim depending on the mounting style, spring-loaded and squeezable rods.
In spring-loaded trim, two springs are used to attach the trim with the light housing. To remove this trim, slide the hook of the springs out of the slot of the recessed housing. This will make the trim piece come off.
Now in squeezable rods, there will be two pieces of rods on either side of the trim. These rods hold the trim in place. For removing, pull the trim down a bit with your hand.
You can use a screwdriver for pulling if the trim is tight. After the roads are visible, squeeze them together and pull them down. The trim will detach in this way.
Step 3 – Determine the Light Housing Type
Recessed lighting fixtures have two types of housing that are commonly used. One is new construction, and the other is remodel.
New construction housing has two rails or bars for holding the recessed can in place. The rails are nailed onto the ceiling joists or rafters. This type of housing is installed before sheetrock or drywall is placed.
Instead of using rails, the remodel housing use clips. These clips hold onto the back of the sheetrock and give support to the housing. Remodel housings are easy to install and remove.
Step 4 – Remove the Light Housing
Removing new construction recessed housings are pretty challenging from the finished side of the room. If you have access to the above ceiling space, use a vice grip to remove the nails used to hold the rails. If you don’t have access, remove the sheetrock or make a bigger hole than the existing one to remove the light housing.
One single rail track can be holding more than one recessed housing. For this case, you have to detach each housing one by one from the rails.
Now removing a remodel housing is easy. This can be done from the finished ceiling. You don’t require access to the above the ceiling for the removal.
After removing the trim, you will find three to four clips in the wall of the housing. There will be a groove in the clips where you can insert a screwdriver. Pry open the clips using a screwdriver, and you can easily remove the recessed housing from the ceiling.
Step 5 – Deal with the Wire Connections and Recessed Light Hole
After you are done removing the light housing, move to the junction box. A junction box is where the electrical connections for a recessed lighting fixture are kept secured. Open the box and remove all the wire connections. Tape the exposed ceiling wire after removing the connections.
If you don’t have plans to install a new recessed lighting fixture, you can remove the wires from the ceiling. You can also cover the recessed light opening by applying a patch and painting it over that patch.
Knowing how to remove old recessed light housing will save a lot of time when you face this situation. This straightforward guide will help you finish removing the light housing on your own.
There are some electrical works related to the removal of the light housing. If you feel uncomfortable, then using the help of a professional is recommended.
Best wishes to you.